Monday, June 9, 2008

right wing skins

Before I drilled the ribs to the skins, I did one last check of the straightness of the ribs by laying a straightedge from the marked locations for the top and bottom hole for each rib and adjusted as required. A sharpie pen then drew a line down each rib. When the skins are put in place for riveting, the line should show through the holes in the skin.

Bottom inboard skin clecoed on.

Top skins clecoed on.

Sunday, June 1, 2008

Right wing cont.....

Drilled and clecoes all of the right wing main ribs to the rear spar.