05/30/2010

Finished deburring and dimpling all wing skins for right wing.  7 hrs.

05/16/2010

All right wing main ribs, leading edge ribs, rear spar and other pieces epoxy coated and ready for final assembly in wing jig. 11 hrs

05/15/2010

All ribs acid etched and dipped in the alodine solution. Dipping works much better than spraying or brushing the alodine solution on. I found 20 seconds of dipping was ideal versus the recommended 1 to 3 minutes of recommended time when you brush the solution on. 5 hrs

5/2/2010

Wing ribs ready for acid etching, alodining and epoxy priming to make them moisture proof.